NampaRecruiter
the smart solution for Nampa jobs

College Graduates - Electrical Engineer II

Company: Raytheon
Location: Nampa
Posted on: September 7, 2018

Job Description:

RAYTHEON'S ELECTRICAL DESIGN DIRECTORATE (EDD) provides engineering design, integration, test and production to core radar, sonar, torpedo and combat system competencies including process and control, integration and test, power systems, torpedo and sonar electronics, receivers and exciters, antennas, and microwave subassemblies. Opportunities currently exist within the following EDD departments:

Antenna & Microwave, Microelectronics Engineering and Technology, Power and Electronic Systems, Receiver, Exciter and Signal Processing, Ship Electronics Systems, Test Development, Test Engineering


JOB DESCRIPTION: The newly hired Electrical Engineer researches, develops, designs and tests electrical (Analog, Power, RF/Microwave, and/or Digital) components, equipment, systems, sub-systems, and networks for defense, commercial, industrial, domestic and foreign purposes. Applications include, but are not limited to, radar, missile, ship systems electronics, torpedoes, and communication systems. The tasks may include laboratory integration, test and evaluation, and fault isolation of prototype hardware. The engineer may also support system studies, analyses, and simulations from concept through detailed design and production. New engineers will work with and will be mentored by senior engineers.

POSSIBLE FOCUS AREAS:

- Antenna Design - Radiating Elements, Reflectors, Feedhorns, Radomes/Frequency Selective Surfaces, Simulation and Layout, Antenna Test
- Antenna Systems - Antenna System Analysis, Array Analysis, Electromagnetic Analysis, Array Calibration and BITE, Signal Level, Assembly, Integration and Test
- Antenna/Microwave Subsystems - Phased Array Subsystems, High Power Subsystems, Antenna Subsystems, Signal Level Analysis, Subsystem Integration and Test
- Mixed Signal Design - Receiver A/D Converters, Direct Digital Converters, Receiver D/A Converters, Digital Waveform Generators, Mixed Signal CCAs, Mixed Signal Modules and Subsystems
- Digital Hardware - Subsystem/Module Digital Circuits, FPGA/ASICs, Mixed Process/Photonics/Sensors, COTS systems, COTS Interfaces, Subsystem Development, VME/PCI interfaces Digital Systems, System Trades, Architecture, Embedded Processing
- Software Design - Real-time Signal Processing, Embedded Software, High Speed Computing hardware and software
- Receiver & Exciter (REX) Design - REX System Analysis, Exciter Design, Receiver Design, Low Noise Sources, Simulation and Modeling, Metrology, Integration and Test
- RF/Microwave Design - Simulation and Layout, Passive Circuits, Amplifiers, Ferrites, Component Test, Material Characterization, Module Design and Test, RF ICs, MMICs Perform measurements on state-of-the-art microwave circuits and devices for the purpose of characterization and modeling.
- Semiconductors -Transistor device physics and design; compound semiconductor processing and manufacturing; materials and materials growth (Including GaAs and GaN),reliability of devices and materials; testing, characterization and development.
- Servo Control Design
- Power Conversion - AC/DC, DC/DC and DC/AC, Linear and Switching Supplies, PFC, ZVS, ACS and Resonant Circuits, Synchronization, Noise Controls
- Power Design - Filter, Harmonic Control, EMI, Circuit Simulation, Magnetic Design, Overload, Short Circuit, Stress Analysis
- Power Distribution - Ground, Air, Shipboard, and Space, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems
- Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators
- Test Development - Hardware and/or Software Test Program Set generation, for testing radar, communication, missile, combat control systems, subsystems and components for various IDS programs
- Test Engineering - Test execution and debug of failures
- Research and Development - Emerging Technologies, Wafer Fabrication, Process Design, Reliability testing

THIS POSITION REQUIRES THE ELIGIBILITY TO OBTAIN A SECURITY CLEARANCE.

Keywords: Raytheon, Nampa, College Graduates - Electrical Engineer II, Engineering, Nampa, Idaho

Click here to apply!

Didn't find what you're looking for? Search again!


I'm looking for
in category
within


Other Engineering Jobs


91B Light-Wheel Vehicle Mechanic
Description: Got a knack for keeping cars and trucks on the road Then join the Army National Guard as a Light-Wheel Vehicle Mechanic and help keep freedom moving forward. As a Light-Wheel Vehicle Mechanic, you will (more...)
Company: Army National Guard
Location: Boise
Posted on: 09/12/2018

15N Avionics Mechanic
Description: Avionics is a term used to describe the dozens of electrical systems necessary to keep aircraft safely in flight. As an Avionics Mechanic in the Army National Guard, you will make sure these systems - (more...)
Company: Army National Guard
Location: Boise
Posted on: 09/8/2018

Pest Control Technician
Description: See why Food Processing Magazine honored Ecolab Pest Elimination as The Top Pest Management Company br br Ecolab is seeking Pest Control Technicians to join its industry leading Pest Elimination (more...)
Company: Ecolab
Location: Boise
Posted on: 09/18/2018


Mid to Senior Level Project Design Engineer
Description: Kittelson has immediate openings for civil transportation engineers in our Anchorage, Bend, Boise and Portland offices to focus on roadway and traffic engineering and bicycle/pedestrian projects, from (more...)
Company: Kittelson & Associates
Location: Boise
Posted on: 09/8/2018

15N Avionics Mechanic
Description: AGE REQUIREMENTS: Must be between the ages of 17 and 35 Avionics is a term used to describe the dozens of electrical systems necessary to keep aircraft safely in flight. As an Avionics Mechanic in the (more...)
Company: Army National Guard
Location: Boise
Posted on: 09/13/2018

Professional A/C Mechanics - Grow Your Business With HomeAdvisor (Cald
Description: Over 25 million homeowners have trusted HomeAdvisor to help them find
Company: HomeAdvisor
Location: Caldwell
Posted on: 09/18/2018

Business Process Engineer with Sharepoint Experience
Description: Need a Business Process Engineer with Sharepoint Experience for a 24 Months Project in Boise,ID. ul li Requires expert level experience using SharePoint as a tool to share documentation
Company: Fusion Global Solutions
Location: Boise
Posted on: 09/8/2018

Design Engineer
Description: br Every day at Perspecta, we enable hundreds of thousands of people to take on our nation's most important work. We're a company founded on a diverse set of capabilities and skills, bound together (more...)
Company: DXC Technology
Location: Boise
Posted on: 09/8/2018

Professional A/C Mechanics - Grow Your Business With HomeAdvisor (Bois
Description: Over 25 million homeowners have trusted HomeAdvisor to help them find
Company: HomeAdvisor
Location: Boise
Posted on: 09/11/2018

Professional A/C Mechanics - Grow Your Business With HomeAdvisor (Gard
Description: Professional A/C Mechanics - Grow Your Business With HomeAdvisor Gard Over 25
Company: HomeAdvisor
Location: Garden City
Posted on: 09/18/2018

Log In or Create An Account

Username:
Password:
 

Forgot password?


Find us on Facebook

Find us on LinkedIn

Get the latest Idaho jobs by following @recnetID on Twitter!

Nampa RSS job feeds